Bushings are located in the trucks and serve as the suspension system for your longboard. They determine how well your truck can turn. Bushings are made of polyurethane, just like your longboard wheels. However, bushings are usually harder durometer than longboard wheels do. Bushings may seem less important, but they affect your ride more than you think. Depending on which set of bushings you have, your board can have completely different characteristics. Figuring out which bushings to use is difficult, to say the least, especially since riding styles and preferences vary from rider to rider. But generally speaking, if you want a stable board at high speeds, you should choose a stiffer set, and vice versa if you want a soft freeride board. Bushings come in many great colors and shapes, and Even though they look like candy, we recommend that everyone avoid eating them. In addition to color and shape, they can differ in terms of hardness, brand, and chemical composition.
Hardness/Durometer
Perhaps the most important characteristic of bushings is their hardness. The hardness you should choose depends primarily on your weight, but also on your riding style. Softer bushings give your truck more maneuverability, while harder bushings provide more stability and make the truck feel more restrictive. We recommend tightening softer bushings a bit more than leaving harder bushings too loose. That way, they’ll perform as intended, and you’ll avoid any play. The chart below explains which hardness we recommend based on your weight.

The feel a bushing gives your ride depends largely on its shape. There are many different shapes, such as cone, tall-cone, barrel, eliminator, stimulator, hourglass, and more.
Venom Bushings has made a small bushing guide

The shape of the bushing determines how the board and trucks feel under your feet. Generally speaking, more rubber across the width provides more stability, while more rubber in height provides more maneuverability. Cones turn more easily than barrels, and barrels turn more easily than eliminators. Different manufacturers make bushings of varying heights.
Combining bushings of different hardnesses and shapes is more the rule than the exception. This is partly because the bushing against the board is subjected to greater pressure than the one against the road, but also because using different hardnesses and shapes allows you to create a set of bushings that feels right for you. Ideally, this is a set that’s agile and responsive at lower speeds but remains stable enough at higher speeds.
While bushings are one of the parts on your longboard that make the biggest difference in terms of ride quality, they’re also very inexpensive. So experiment to find out which bushings work best for you and your riding style. Does your longboard not turn as much as you’d like? Switch to softer, taller, and more responsive bushings. Do you wobble at high speeds? Switch to harder, wider, and more stable bushings.
Brands that manufacture high-quality bushings include RAD, Riptide, Venom, Khiro, Divine, Orangatang, Blood Orange, and others.
A general guide to help you choose the right bushings!
23-45.5 kg: 73-80a
34-57 kg: 78-82a
46-66 kg: 80-85a
57-80 kg: 80-87a
66-89 kg: 82-90a
80-100 kg: 85-93a
91-114 kg: 90-93a
102 kg and up: 90-97a
R.A.D. – Premium Skateboard Bushings & Washers:
White: 86a (black can)
Red: 89a
Blue: 92a
Orange Tong Nipples:
Soft (orange): 80-180 lbs / 35-85 kg
Medium (purple): 160-230 lbs / 70-105 kg
Hard (yellow): 200-270 lbs / 90-125 kg
SHR – Super High Rebound
When talking about bushings or wheels, people often mention what’s called “rebound.” Simply put, it’s a measure of how well the material springs back. So, to put it bluntly, you can have different bushings with the same Duro rating, but they can behave very differently. A cheap bushing—the kind you might get on a basic complete board if you shop at a regular sports store—is usually lower quality, since this is an area where the manufacturer cuts corners. They figure people probably don’t care that much about it. But since we’re nerds and know more than a sports store, we really know that it can make a big difference 🙂
In other words, duro is a measure of how much force is required to compress the material, while rebound is a measure of how well the material springs back—which, ultimately, is what makes a huge difference. For the best type of bushing, you should skip one like the SHR—which stands for Super Rebound Bushing.

